Pool Heater Electric Spa Heater Electric Heating and Thermostat Pool Heat Pump
1. Check the circulation system first before turn on the heater
2. Never disassemble the heater when connecting to power supply
3. Never turn on the heater without water
4. No power switch is designed for the heater. The front panel switch can only turn off the controller, thus you should cut off the main power supply before performing maintenance or repair
5. Proper grounding is important
6. Start the circulation pump for at least 2 minutes before turn on the heater, and turn off the circulation pump at least 2 minutes after turn off the heater
7. Once unexpected high temperature 60℃（140℉）occurs, the temperature switch cuts off the system. You need to cut off the main power supply, resolve the fault and wait the temperature to fall below normal temperature, then press the ‘Reset’ button to restart the heater

Feature
Sensor technique are:
A. The flow-temperature sensor is always under the control of software, accurately monitoring the temperature status of the whole system, and then adjust the settings to maintain the water temperature and protect the heater from unexpected situations;
B. No mechanical sensors, avoid any mechanical failure to affect the function of the heater;
C. Avoid affection of ion accumulation to mechanical sensors;
D. Greatly reduce unnecessary circulation cycles, prolong the life of circulation pumps and save more energy.
Intelligent self-diagnose function: The control system keeps on monitoring the running status of every parts of the heater, and quickly reacts and displays corresponding hint message for any incident, so as to avoid any damage or malfunction happens

Package List
1 x Pool Heater
2 x Interface

Product Features

• Pool Heater Thermostat – Power: 11 KW; Volt: AC 220-240V; Current: 50A; Housing material: Aluminum-coated plate; Pipe Diameter: 2″; Net Weight: 16.5lbs; Package Size: 4.7″x22″x14.9″
• The control system keeps on monitoring the running status of every parts of the heater, and quickly reacts and displays corresponding hint message for any incident, so as to avoid any damage or malfunction happens.
• This Heater Thermostat adopts constant temperature controller, temperature sensor replaces traditional magnetic flow switch, it improves greatly of trouble free in working time, adaptability of water environment and stability.
• Manual reset temperature control switch – Once unexpected high temperature 60℃ occurs, the temperature switch cuts off the system.
• Wide Use – The pool heaters are special used for small pool less than 5CBM, massage pool and hot spring to heat and keep warm; Meanwhile, can be a assistant for heat pump in heating.