6″ x 12″ repair patch offered in white, black, gray, or tan colors. This patch is perfect for repairing roof leaks, pond liners, cracked plastic bathtubs/showers/sinks, skylights, vinyl skirting, siding, and other endless uses. Instructions: 1.If repair is under water, lower water level below repair area and let dry. Surface needs to be 50 degrees
6″ x 12″ repair patch offered in white, black, gray, or tan colors. This patch is perfect for repairing roof leaks, pond liners, cracked plastic bathtubs/showers/sinks, skylights, vinyl skirting, siding, and other endless uses. Instructions: 1.If repair is under water, lower water level below repair area and let dry. Surface needs to be 50 degrees Fahrenheit or warmer or else you need a Primer. 2.Clean area by scuffing with a Scotch-Brite pad then wiping down with denatured alcohol and let dry. Do not skip this important step. 3.Cut repair tape to the desired length and width with scissors or a razor. The tape should extend at least 2″ around the crack. When sealing the outside of holding tanks, extend at least 3″. 4.Peel and stick (colored side up). The gray side is the adhesive with a clear release liner. 5.The adhesive is pressure activated, use of a roller recommended. 6.Allow the tape 24 hours to fuse before adding water. Tips: For cracked plastic bathtubs/showers/sinks, the crack will probably want to continue to expand. Drilling a small hole at each end of the crack may help keep it from running. Cover the final repair with a bathmat as glue may continue to seep out of the edges as the tape is being stepped on. The patch is best applied if temperatures are above 50 degrees Fahrenheit. If you’ve tried repairing liners with glues or other patches and had nothing but frustrations, you’ll appreciate this high-quality product.
